Bathroom Sink Bridge Faucet

Bathroom Sink Bridge Faucet | A bathroom is made up of different faucets installed. This may be a tub, wash hand basin and water closet. However others could possibly have the shower, bathtub, water closet and washing basins. Old homes and sometimes the brand new ones could possibly have just the bathtub installed without having a shower area. Due to running costs of water and heating, a property owner may wish to get a shower compartment but the cost of purchase to get a ready cubical maybe prohibitive. Therefor an alternative to get a in built shower compartment may arise.

A shower compartment contains tiled walls along with a shower rail or glass door. The framework for that door is usually aluminum. It could possibly have a hinged or sliding door. This will depend for the location or size the lavatory. The home owner may rip off the bathtub depending for the preferences from the tub along with a shower. A point to note is how to drain water inside the shower. This could be solved by raising a floor with the compartment to allow for drainage pipes along with a floor trap.

See also: Moen Lavatory Faucets

The shower compartment is usually one meter away wide and four feet long. Identify the positioning at the old bathtub’s water and drainage points. On the corner measure one meter away internal dimension. Measure in the end point four feet long. Chase the wall for water both cold and hot water supply and fasten the piping. Also concrete a plinth of 4 inches to support a floor trap for waste water.Erect the brand new wall of 4 feet long, four inches thick along with a height of seven feet. This compartment uses an existing back wall along with a new side wall.

After the wall is erected, ceramic tiles are laid around the shower compartment. The floor is laid to fall towards a floor trap. A raised kerb of three inches is performed and tiled. The shower fittings are then fixed onto the walls. Testing pipes before tiling is very important. If the cost of a shutter is prohibitive, a shower rail could be fixed. On this a shower curtain is hung to avoid splashing in to the room. The aluminum shutter or any other appropriate shower door is fixed to open up outwards in to the room.